Ultimate 106 – Edition 2 – Issue 3 - 24.12.02 – 5129
To connect up to 6 master extension sockets
IMPORTANT
You must connect your extensions to a MASTER telephone socket. You can purchase master sockets and wiring kits from any good electrical retailer.
●Install the required number of
1 extension sockets
In your Wiring Kit you will find the white socket(s) and a disposable insertion tool.
You will need to decide how you wish to fix the extension socket and how the cable will be run into it.
Push out the plastic ‘holes’ in the backbox that correspond with where you wish the cables to run.
Screw the backbox of your extension socket onto the skirting board or wall using the screws provided.
Now strip off approximately 5 cms (about 2 ins) of outer sheath from the extension cable. The
Run the required cable length to your
Ultimate 106. Attach the cable firmly to the wall.
Connector 1 |
|
|
| Connector 6 |
Connector 2 |
|
|
| Connector 5 |
|
| |||
Connector 3 |
|
|
| Connector 4 |
Thread the plastic wire grip through the socket (as shown above).
The telephone extension cable contains 4 strands of wire, 2 with broad orange, or blue stripes, 2 with narrow orange or blue stripes.
Choose a pair of wires of the same colour, for instance the broad blue stripes and the narrow blue strips.
Then, holding the insertion tool, as shown, simply push the wires firmly into connection 2 and 5. The broad blue stripes into connector 2, the narrow blue stripes to connector 5. Secure the cable with the cable grip.
6
