Ultimate 106 – Edition 2 – Issue 3 - 24.12.02 – 5129
Setting up your Ultimate 106 system
Before you use your Ultimate 106, you must select some basic settings in order to choose the way you want your phone system to work.
There are 2 types of settings which you can adjust: System settings and Extension settings. When changing System settings switch to Program mode, when changing Extension settings switch to Normal mode (see program switch on “At a glance” page 1).
All settings must be carried out using the master phone on extension 11.
System settings
System settings affect all extensions connected to your Ultimate 106. To change Systems Settings, the Programme switch must be set to PROGRAM.
•Time and Date.
•Day and Night Ringing.
•Call Barring.
•Hotline.
•Fax Extension.
•Direct Line Extension.
•System Reset.
•Music.
•Extension Ring Delay.
To make any system settings
Remove the lower cover.
PROGRAM
SWITCH
Power
In Use
Day/Night
Messages
DISA/Ans
EXT 11 EXT 12 EXT 13 EXT 14 EXT 15 EXT 16
COVER |
| Ultimate 106 |
|
| 1X6 PABX WITH VOICE MAIL & CALLER ID |
Set the programme switch to PROGRAM.
Remember to switch off the programme switch when you have finished changing system settings, otherwise you will not be able to receive or make any calls when in Program mode. Callers will still hear the usual ringing tone.
PLEASE NOTE
When in program mode, a different kind of dial tone is heard and the “In Use” light comes on.
IMPORTANT
When in program mode, the extensions 11-16
are identified as the following: extn 11 = 1, 12 = 2, 13 = 3 etc.
9
