Ultimate 106 – Edition 2 – Issue 3 - 24.12.02 – 5129

Using your Ultimate 106 as a Room Monitor

You can use extensions on your Ultimate 106 to monitor sounds.

Using Ringback

You can set your Ultimate 106 to tell you when engaged extensions or telephone numbers are free again.

To set the Room Monitor

Press keypad buttons in order shown

To hear the sounds close to an extension:

Lift the receiver.

80# Enter this code on the extension phone

and leave the receiver off hook.

When that extension is dialled from any other extension, you can hear the sounds at the off-hook extension instead of an engaged tone.

By using speakerphones as extensions, it is possible for 2-way communication between the extension on Room Monitor and another extension.

To set automatic internal Ringback

Your Ultimate 106 can be set to call you back when an engaged extension or external line you have dialled becomes free again.

Before replacing the handset:

RECALL

5Replace the handset. When the extension becomes available, your handset will ring for 30 seconds. When you pick up the handset, the voice announces:

“Ringback Extension X” or “Ringback

external line”. Then the extension you are calling rings. Automatic extension Ringback does not apply to the doorphone.

PLEASE NOTE

If you lift the handset while waiting for Ringback, the internal Ringback request is cancelled.

28

Page 28
Image 28
BT Using your Ultimate 106 as a Room Monitor, Using Ringback, Ringback Extension X or Ringback, To set the Room Monitor