BT 6861 manual Your BT Zenith Flip is ready to use, Battery performance, Helpline

BT Zenith Flip – Issue 1 – Edition 04 – 08.09.05 – 6861

10		Getting started
	Battery performance		4. After 24 hours charging, plug one end of the telephone line
	When the battery is fully charged
			cord into the base and the other end into the wall socket.
	the display a full, yellow-green
	coloured battery.
	Running the battery right down at
	least once a week will help it last as
	long as possible.
	On a full charge, your BT Zenith
	Flip handset gives you up to 10
	hours talk time or up to 90 hours
	standby.
	The charge capacity of a
	rechargeable battery will reduce
	with time as it wears out, giving
	the handset less talk/standby time.
	Eventually it will need to be
	replaced.		Route the cable through the channel on the base.
	The battery and handset may
	become warm during charging.
	This is normal.		Date and time
	Only use a Li-ion rechargeable		If you have subscribed to your network’s Caller Display
	battery with a recommended
	capacity of 3.7V 720mAh.		service, the time will be set automatically when you
	Using an inappropriate battery		receive your first call. However, this will not set the date.
	will invalidate your guarantee and
			To set the date and time, see page 69.
	may damage the telephone.
	Helpline		Your BT Zenith Flip is ready to use.
	If you are having difficulties setting
	up or using your BT Zenith Flip,
	please call the BT Zenith Flip
	Helpline on 0870 605 8047

If you experience any problems, please call the Helpline on 0870 605 8047