BT Zenith Flip – Issue 1 – Edition 04 – 08.09.05 – 6861

20 Using the phone

If you have assigned a different ringtone for the caller’s number stored in the phonebook, you will hear the ringtone you have selected. See page 27. Please note you need to subscribe to a Caller Display srvice for this feature to work.

See page 63 for more information on auto talk.

Handsfree switches on the handset loudspeaker so you can talk to your caller without holding the handset. It also enables other people in the room to listen to both sides of your conversation.

Receiving calls

Providing you have subscribed to your network’s Caller Display service, the caller’s number (and name if stored in the phonebook) is displayed.

When the handset is closed, the exterior screen shows the caller’s details and External Call or Internal Call.

Open the handset to automatically answer the call. If auto

talk is set to OFF, you will need to press .

Handsfree

Make a handsfree call

1.Press . The display shows . Dial the number. Your call can be heard over the handset’s loudspeaker.

2.To switch back to the handset at any time, press

again. Press to end the call.

During a call you can open the phonebook by pressing Names and add, view details, delete or edit an entry in the phonebook. To use the phonebook, see page 25.

If you experience any problems, please call the Helpline on 0870 605 8047

Page 20
Image 20
BT 6861 manual Handsfree, Using the phone, Make a handsfree call