BT Zenith Flip – Issue 1 – Edition 04 – 08.09.05 – 6861
| Additional handsets and bases | 71 | |
|
|
|
|
4. Select Option. The handset screen shows Handset | If registration does not work: |
| |
Registered. | Try again selecting a different |
| |
When a handset is registered to a base, it is | base number. |
| |
Make sure there is no other |
| ||
automatically assigned a number which is displayed on |
| ||
electrical equipment very close |
| ||
the handset and must be used for internal calls. | by that may interfere with the |
| |
| registration signal. |
| |
Register handset with another BT Zenith Flip base
1.Select Menu and scroll UP/DOWN/LEFT/RIGHT to Registration.
2.Select OK. Register Handset is highlighted.
3.Select OK. The current base is marked with a *. Scroll UP or DOWN to select the base you want. Select OK.
4.Enter the base’s SYSTEM PIN.
5.Select OK. The display shows Base Search 2. You now have 90 seconds to register the handset.
At the base:
6.Press and hold 
until you hear the base beep. The handset screen shows Handset Registered.
You can now use the handset.
If you experience any problems, please call the Helpline on 0870 605 8047
