Handset priority
1. Select
Menu
and scroll UP/DOWN/LEFT/RIGHTto
Base
Settings
.Select
OK
.Scroll DOWNto
Handset Priority
.
2. Select
OK
.Use UP or DOWN to select from:
All Handsets
–all handsets ring together. Select
OK
Select Handset
–to choose one handset to ring first.
Select
OK
then scroll UPor DOWN to the handset you
want, and select
OK
.Now scroll UPor DOWN to select
how many rings the handset will give before the other
handsets start ringing as well. Select
OK
.
Display shows
Handset Priority Saved
.
3. Select
Back
to return to the previous screen.
Dial mode
1. Select
Menu
and scroll UP/DOWN/LEFT/RIGHTto
Base
Settings
.Select
OK
.Scroll DOWNto
Dial Mode
.
2. Select
OK
.The current setting is highlighted.
3. Press UP or DOWN to select
Tone Mode
or
Pulse Mode
.
Select
OK
to confirm.
4. Select
Back
to return to the previous screen.
65Base settings
BT Zenith Flip – Issue 1 – Edition 04 – 08.09.05 – 6861
If you experience any problems, please call the Helpline on 0870 605 8047
If you have more than one handset
registered to your base, they all
ring at the same time.
With handset priority, you can set
one handset to ring before the
others.
Your BT Zenith Flip is set to TONE
dialling. You should never need to
change this unless connected to a
switchboard that requires PULSE
dialling. Check with your
switchboard supplier.
Switch to Pulse during a call
If you have dialled out from a
switchboard using Pulse dialling,
you can switch to Tone dialling
during the call by pressing and
holding the button.
See also, Connecting to a
switchboard, page 80.