Cabletron Systems 9A100 manual Switch Installation and Setup, Unpacking the Switch

2 SWITCH INSTALLATION AND SETUP

After you read this chapter, you will be able to perform the following tasks:

UInstall the SmartSwitch 9A100 switch module into the SmartSwitch 9000 chassis

UComplete the initial configuration

UUse the console interface

UInstall the SmartSwitch ATM Administrator graphical management software

2.1UNPACKING THE SWITCH

Remove the accessory carton from the shipping box. Carefully remove the switch from its packing material.

2.1.1Check Accessory Carton Contents

Open the accessory carton and check that it contains the following items:

—7-foot UTP cable terminated on both ends with RJ-45 connectors

—RJ-45 to 9-pin female adapter (labeled PC)

—Console cabling instruction sheet

—Diskettes containing switch software, MIB files, SmartSwitch ATM Administrator software, and release notes

—SmartSwitch 9A100 Release Notes

—SmartSwitch 9A100 Quick Start

—SmartSwitch 9A100 User Guide

—SmartCell 6A000/ZX-250 Reference Manual

If any of these items is missing, contact Cabletron customer support immediately.

SmartSwitch 9A100 User Guide 2-1