Cabletron Systems 9A100 204.95.77.240, IP address of my TFTP server, tftpboot/bobr/core, password

Switch AdministrationSaving Core Dumps

Enter the set CoreDump command to enable the core dump feature. For example,

SmartSwitch # set coredump
EnableCoreDump(n)	: y	< “y” to enable core dump feature
ServerIP()	: 204.95.77.240	< IP address of my TFTP server
CoreDumpFile()	: /tftpboot/bobr/core	< full path name for core dump files
userName()	: bobr	< login name on the server
UserPassword()	:	< password

SmartSwitch #

Note The set CoreDump command uses FTP to create the core_cpu and core_cmn files. If your server does not run FTP, create these files manually. Then execute the

set CoreDump command.

Note On UNIX systems, make sure that the permissions are set correctly so that data can be written.

Note For security, the set CoreDump command retains your password only long enough to create the core dump files. Your password is then dropped from system memory.

To see the current core dump configuration, enter the show coredump command.

SmartSwitch # show coredump

Core Dump Enabled			: Yes
Core	Dump	Server IP : 204.95.77.240
Core	Dump	File	: /tftpboot/bobr/core

SmartSwitch #

SmartSwitch 9A100 User Guide 4-31