Paper Does Not Feed Properly or Paper Jams 157
Troubleshooting
Paper Jams
Remove the paper according to the following procedure.
1Slowly pull the paper out, either from the sheet feeder or from the paper
output slot, whichever is easier.
If the paper tears and a piece remains inside the printer, open the front
cover and remove it.
If you cannot pull the paper out, plug the printer off and plug it back on. The
paper will be ejected automatically.
2After removing all paper, close the front cover.
Note ➤When reloading the paper into the printer, refer to “Paper Does Not Feed
Properly” to confirm that you are using the correct paper and are loading it
into the printer correctly.
S200.book Page 157 Saturday, September 22, 2001 2:34 PM