Chapter 7 Receiving Documents 7-15
Receiving
Documents
LASER CLASS 3170 Series.
CFYA/YAH/YAN 120v US V1.0
2.
Set
Press Set. Then press the search buttons to scroll the display so
you can see each setting.
SETUP FILE
1.FILE NAME
SETUP FILE
6.PRINT RX DOC.
3.
Set
Press Set then follow the summary in the table below to perform
the settings.
4.
Stop
Press Stop to return to standby.
Transfer Setup Summary
The default settings, shown in bold below, remain in effect unless
you change them.
1.FILE NAME Enter a file name up to 24 characters long.
2.
SELECT LOCATIONS
Select the numbers of the fax machines where you want
documents transferred.
TEL = Close the One-touch Speed Dialing panels
and press a One-touch Speed Dialing button
or press the Coded Dial button followed by a
three-digit code for the Coded Speed Dialing
number to enter the number of the fax
machine where you want documents trans-
ferred. The telephone number of the destination
fax must be registered for One-touch or Coded
Speed Dialing on your fax.
3.PASSWORD 0000-9999
Enter a four-digit number (0000-9999) to protect the transfer
file settings. Use of a password is recommended. This operation
password protects the transfer file from unauthorized access
to your settings. You will also need to enter this password
when you put the fax in the document transfer mode.