Chapter 11 Setting Up and Using Polling 11-15
Setting Up and
Using Polling
LASER CLASS 3170 Series.
CFYA/YAH/YAN 120v US V1.0
Setting Up Polling Sending
This section shows you how to set up your fax to store and hold a
document until it is polled by another fax to send it.

Before You Can Be Polled to Send

Before you set up your polling box, contact the parties who are going to
poll your fax to receive documents and confirm the following points:
❏The other parties must know your ITU-T subaddress number.
❏If you are also using an ITU-T password for the polling box, they
must also know this password. This password setting is optional.
❏Your TX PASSWORD must match the ITU-T password attached
when the other party calls you. Confirm that the TX PASSWORD on
your fax matches the ITU-T password attached when the other party
calls you.
❏If the other party’s fax does not support ITU-T subaddress/pass-
word transactions, you may be able to use the polling box #00.

Setting Up a Polling Box

Before you can use polling sending, you must create a polling box with
the File settings. The polling box holds the document in the memory
until the other party polls your fax to send the document.
1. Open the FILE SETTINGS menu.
Open all three of the One-touch Speed Dialing panels. Then press
Data Registration.
Data
Registration
REGISTRATION
1.DATA REGISTRATION
Set
Press Set.
DATA REGISTRATION
1.USER SETTINGS