2 Installing the Telephone | User’s Guide |
|
|
|
|
Install the Base Unit on a Desktop
This section provides procedures to install the base unit on a desktop or table.
If you want to mount the base unit on a wall, go to “Install the Base Unit on a Standard Wall Plate” on page 16 or “Install the Base Unit Directly on a Wall” on page 19.
1Plug one end of the
2Plug the other end of the telephone cord into the telephone jack that is connected to your PARTNER ACS.
Figure 2: Connect Telephone Cord
Telephone jack connected to communications system
Line In jack
14 Install the Base Unit on a Desktop
