Wireless Telephone Planning | Canon 3920 guide

SEARCHING...	You may be at the range limit. Move back
or	within the system range limit (for example,
OUT OF RANGE	move closer to the base unit or a repeater.)
appears in the	Consider installing a repeater if you
handset display.	experience this condition frequently.
	Make sure there is power going to the base
	unit.
	Check the connection between the PARTNER
	ACS and the base unit.
	Determine the number associated with the
	telephone. Dial that telephone number from a
	“wired” telephone. If you hear busy tone, the
	base unit is not communicating with the
	PARTNER ACS. Perform the following steps:
	• Check the power.
	• Verify that the telephone cord is connected
	to the base unit.
	• Make sure the handset is properly
	registered to the base. See the Avaya 3920
	Wireless Telephone Planning and
	Installation Guide to register the handset
	with the base unit.
	• Verify that the installation guidelines have
	been followed, especially for systems
	where there are more than three Avaya
	3920 Wireless Telephones.

ACQUIRING	Make sure the telephone cord is seated
LINK appears in	properly in the base unit and in the wall jack.
the handset
display.

Canon 3920 manual Wireless Telephone Planning