2 Installing the Telephone

User’s Guide

 

 

 

 

Install the Base Unit on a Standard Wall Plate

This section provides procedures to mount the base unit on the wall if a standard wall plate, with a telephone jack connected to the PARTNER ACS, is installed in the wall.

If you want to mount the base unit on the wall and a standard wall plate is not installed, go to “Install the Base Unit Directly on a Wall” on page 19.

! CAUTION:

Do not mount the base unit on the ceiling.

1To attach the wall mount stand to the base unit, slide the wall mount stand into the notches at the top of the base unit. Then pull the wall mount stand down and snap it into place.

Figure 4: Attach Wall Mount Stand to Base Unit

16 Install the Base Unit on a Standard Wall Plate

Page 16
Image 16
Canon 3920 manual Install the Base Unit on a Standard Wall Plate, Attach Wall Mount Stand to Base Unit