User’s Guide | 4 Using Your Telephone |
|
|
|
|
Changing Handset Settings
This section describes how to:
•Change the earpiece volume
•Change the ring type and volume
•Set Vibrate mode
•Turn the ringer off
•Set the End of Range alarm
Change Earpiece Volume
Press the Vol + and - buttons on the side of the handset during a call to change the earpiece volume on the handset.
Change Ring Type and Volume
Press the Vol + and - buttons on the side of the handset in Standby mode (the handset is out of the charger unit and not in use) to change the volume.
To change the ringer type:
1Press menu.
2Press menu again to select “Change Ringer Type.”
3Use the Vol + and - buttons to scroll up/down to select the desire ring tone. Each time you select a tone, the handset plays that tone. You can choose from six tones.
4Press menu to set the ring tone. The Saved message appears.
5Use the Vol + and - buttons to select “Exit.”
6Press menu.
Changing Handset Settings 49
