Removing Punch Waste
When the punch waste tray of the External 2/3 Hole Puncher becomes full, a screen prompting you to remove the punch waste appears on the touch panel display. Follow the procedure described below to remove the punch waste.
1
Routine Maintenance
This procedure is necessary only if the External 2/3 Hole Puncher is attached.
1 Open the front cover of the punch waste tray, and pull out the punch waste tray..
1.Open the front cover of the punch waste tray.
2.Pull out the punch waste tray.
2 Discard the punch waste..
Make sure that the punch waste tray is completely emptied.
Staple |