kShooting Movies

5 Focus and shoot the movie.

The procedure is the same as steps 3 and 4 for “Autoexposure Shooting” (p.182).

ISO Speed During Manual Exposure Shooting

With [Auto], the ISO speed will be set automatically within ISO 100 - ISO 6400.

You can set the ISO speed manually within ISO 100 - ISO 6400 in whole-stop increments. Under [54: Custom Functions (C.Fn)], if [2: ISO expansion] is set to [1: On], the manual setting range will expand so you can also select H (equivalent to ISO 12800).

Under [54: Custom Functions (C.Fn)], if [3: Highlight tone

priority] is set to [1: Enable], the ISO speed will be ISO 200 - ISO 6400.

Since shooting a movie at ISO 12800 may result in much noise, it is designated as an expanded ISO speed (displayed as “H”).

Under [54: Custom Functions (C.Fn)], if [2: ISO expansion] is set to

[1: On] and you switch from still photo shooting to movie shooting, the manual setting range’s maximum will be H (equivalent to ISO 12800). Even if you switch back to still photo shooting, the ISO speed will not revert to the original setting.

Exposure compensation cannot be set.

Changing the shutter speed or aperture during movie shooting is not recommended since the changes in the exposure will be recorded.

If you change the shutter speed while shooting under fluorescent or LED lighting, image flicker may be recorded.

When ISO Auto is set, you can press the <A> button to lock the ISO speed.

If you press the <A> button and recompose the shot, you can see the exposure level difference on the exposure level indicator (p.187) compared to when the <A> button was pressed.

By pressing the <B> button, you can display the histogram.

When shooting a movie of a moving subject, a shutter speed of 1/30 sec. to 1/125 sec. is recommended. The faster the shutter speed, the less smooth the subject’s movement will look.

186