Handy Features
3Setting the Image Review Time
You can set how long the image is displayed on the LCD monitor immediately after capture. If [Off] is set, the image will not be displayed immediately after image capture. If [Hold] is set, the image review will be displayed up until the [Auto power off] time.
During image review, if you operate any camera controls such as pressing the shutter button halfway, the image review will end.
Under the [z1] tab, select [Image review], then press <0>. Select the desired setting, then press <0>.
3Setting the COPYAuto
To save battery power, the camera turns off automatically after the set time of idle operation elapses. ou can set this auto
If [Disable] is set, either turn off the camera or press the <B> button to turn off the LCD monitor to save battery power.
Even when [Disable] is set, if the camera is not used for 30 min., the LCD monitor will turn off automatically. To turn on the LCD monitor again, press the <B> button.
Under the [52] tab, select [Auto power off], then press <0>. Select the desired setting, then press <0>.
217