Installing and Removing the Battery and Card

After opening the card slot/battery compartment cover, be careful not to swing it back further. Otherwise, the hinge may break.

The number of possible shots depends on the remaining capacity of the card, image-recording quality, ISO speed, etc.

Setting [z1: Release shutter without card] to [Disable] will prevent you from forgetting to insert a card (p.216).

Removing the Card

1

2

Set the power switch to <2> (p.35).

Open the cover.

Make sure the access lamp is off, then open the cover.

If [Recording...] is displayed, close the cover.

3 Remove the battery.

Press the battery lock lever as shown by the arrow and remove the battery. To prevent short circuiting of the battery contacts, be sure to attach the provided protective cover (p.30) to the battery.

4

5

Remove the card.

Gently push in the card, then let go to eject it.

Pull the card straight out.

Close the cover.

Press the cover until it snaps shut.

33