qChanging the Metering ModeN

Four methods (metering modes) to measure the subject’s brightness are provided. Normally, evaluative metering is recommended.

In Basic Zone modes, automatic selection is set automatically.

1

2

Select [Metering mode].

Under the [z3] tab, select [Metering mode], then press <0>.

Set the metering mode.

Select the desired metering mode, then press <0>.

qEvaluative metering

This is a general-purpose metering mode suited even for backlit subjects. The camera sets the exposure automatically to suit the scene.

wPartial metering

Effective when the background is much brighter than the subject due to backlighting, etc. The gray area in the left figure is where the brightness is metered to obtain the standard exposure.

rSpot metering

This is for metering a specific part of the subject or scene. The gray area in the left figure is where the brightness is metered to obtain the standard exposure. This metering mode is for advanced users.

121