3Lens Peripheral Illumination / Chromatic Aberration Correction
Chromatic Aberration Correction
1 Select the setting.
Check that [Correction data
available] is displayed for the attached lens.
Select [Chromatic aberration], then press <0>.
Select [Enable], then press <0>. If [Correction data not available] is displayed, see “Lens Correction Data” on the next page.
2 Take the picture.
The image will be recorded with the chromatic aberration corrected.
With [Enable], the maximum burst for continuous shooting will greatly decrease.
If you play back a RAW image shot with the chromatic aberration corrected, the image will be displayed on the camera without the chromatic aberration correction applied. Check the chromatic aberration correction with Digital Photo Professional (provided software, p.366).
135