With a PictBridge printer, you can easily print images with DPOF.
1Prepare to print.
See page 282.
Follow the “Connecting the Camera to a Printer” procedure up to step 5.
2
3
Under the [x1] tab, select [Print order].
Select [Print].
[Print] will be displayed only if the camera is connected to a printer and printing is possible.
4Set the [Paper settings] (p.284).
Set the printing effects (p.286) if necessary.
5Select [OK].
Before printing, be sure to set the paper size. Certain printers cannot imprint the file number.
If [Bordered] is set, certain printers may imprint the date on the border. Depending on the printer, the date may appear faint if it is imprinted on a bright background or on the border.
Under [Adjust levels], [Manual] cannot be selected.
If you stopped the printing and want to resume printing the remaining images, select [Resume]. Note that printing will not resume if any of the following occur:
•Before resuming the printing, you changed the print order or deleted
•When you set the index, you changed the paper setting before resuming the printing.
•When you paused the printing, the card’s remaining capacity was low. If a problem occurs during printing, see page 290.
294