Shoot by Ambience Selection

Press the <Y> <Z> keys or turn the <6> dial to select the ambience.

XThe LCD monitor will display how the image will look with the selected ambience.

4Set the ambience effect.

Press the <W> <X> keys to select the effect bar so that [Effect] appears at the bottom.

Press the <Y> <Z> keys or turn the <6> dial to select the desired effect.

5 Take the picture.

Press the shutter button completely to take the picture.

To return to viewfinder shooting, press the <A> button to exit Live View shooting. Then press the shutter button completely to take the picture. If you change the shooting mode or set the power switch to <2>, the setting will revert back to [ Standard setting].

The Live View image shown with the ambience setting applied will not look exactly the same as the actual photo.

Using flash may minimize the ambience effect.

In bright outdoors, the Live View image you see on the LCD monitor may not have exactly the same brightness or ambience as the actual photo. Set [52: LCD brightness] to 4 and look at the Live View image while the LCD monitor is unaffected by outside light.

If you do not want the Live View image to be displayed when setting functions, press the <Q> button after step 1 and set [Ambience-based shots] and [Effect].

83