3Menu Function Settings

When you set the power switch to <k>, the [Z1/Z2] tab will show functions dedicated to movie shooting. The menu options are as follows.

[Z1] menu

[Z2] menu

AF method

The AF methods are the same as described on pages 164-170.You can select [u+Tracking], [FlexiZone - Multi], or [FlexiZone - Single]. For movie shooting, [Quick mode] cannot be used.

Movie Servo AF

During movie shooting, the camera focuses the subject continuously. The default setting is [Enable].

When [Enable] is set:

•Even if you do not press the shutter button halfway, the camera will continue focusing the subject.

•Since the lens is always operating, it will consume battery power and the movie shooting time (p.194) will be shorter.

•Depending on the lens, the focusing noise may be recorded. To reduce the recording of the lens operation noise, use a commercially-available external microphone. With EF-S18-135mm f/3.5-5.6 IS STM lens, the lens operation noise will be minimal.

•During Movie Servo AF, turn off the camera’s power before you set the lens’ focus mode switch to <MF>.

207