Canon 990 IS Changing Shooting Functions

Changing Shooting Functions
136
Changing the Lens Retract Time
For safety reasons, the lens retracts about 1 minute after pressing the 1
button when in a shooting mode (p.27). You can set the retraction time to
[0sec.].
●Select [Lens Retract], then press the qr
buttons to select [0 sec.].
If you set the mode switch to 4, and the mode to G, you can change the
settings in the 4 tab (p.48).
Turning off the Red-Eye Reduction Function
The red-eye reduction lamp lights in order to reduce the red-eye effect that
occurs when shooting in dark conditions with the flash. You can turn off this
function.
●Select [Flash Settings], then press the m
button.
●Press the op buttons or turn the  dial
to select [Red-Eye Lamp], then press the
qr buttons to select [Off].
Before attempting to shoot using a function explained in this chapter in
modes other than G mode, check if the function is available in those
modes (pp.150 – 153).
Changing Shooting Functions