Canon B120, B140, B115 manual LCD messages Message Cause

LCD messages

Message Cause Action

CLEAR PAPER JAM	There is a paper jam.
DATA ERROR	An error has occurred and all
	one-touch speed dialling, coded
	speed dialling, and user data
	have been lost.

Clear the paper jam (see p. 9-1) and reload paper in the multi- purpose tray. Press [Stop].

Press [Start/Copy], then re- register the data (see Chapter 2).

DOC. TOO LONG	The document is longer than
	750 mm.
ECM RX	The fax is receiving a document
	using Error Correction Mode
	(ECM).

Use a copier to make a reduced copy of the document and then send the copy.

ECM receptions may take longer than normal receptions. Turn off ECM if you need to receive quickly, or if you know your local lines are in good condition (see ECM RX, p. 8-4).

ECM TX	The fax is sending a document
	using Error Correction Mode
	(ECM).

ECM transmissions may take longer than normal transmissions. Turn off ECM if you need to transmit quickly, or if you know your local lines are in good condition (see ECM TX, p. 8-3).

9

MEMORY FULL	The fax’s memory is full
	because it has received too
	many documents, or a very long
	or detailed document.
	The fax’s memory is full
	because you either tried to send
	too many pages at once, or you
	tried to send a very long or
	detailed document.

MSG DATA LOST	An error has occurred and all
	voice message data has been
	lost.

Print any documents stored in memory (see p. 5-14).

Then start again.

Free up space in the fax’s memory by printing or deleting any documents in memory you no longer need (see pp. 5-14, 5-15).

If multiple pages are loaded, separate the pages into smaller stacks. If not, try sending the document by direct sending (see p. 5-2).

Re-record all answering machine messages, such as the outgoing message and alternative outgoing message (see p. 7-1).

SOLUTIONS TO COMMON PROBLEMS

9-17