Canon B120, B140, B115 manual Sequential broadcasting, Sending a document to more than one location

Sequential broadcasting

Sending a document to more than one location ___

Sequential broadcasting sends one document to more than one location.

You can send to a total of 60 locations as follows:
• One-touch speed dialling	=	9	locations
• Coded speed dialling	=	50	locations
• Regular dialling (Numeric buttons dialling)	=	1	location

You can enter the one-touch speed dialling and coded speed dialling locations in any order. You simply press the one-touch speed dialling button, or press [Coded Dial/Directory] followed by the two-digit code.

You can also include one location using regular dialling. Remember that when using regular dialling, you must press [Start/Copy] after entering the number.

You must press each button within 10 seconds of the preceding one. The fax begins the operation approximately 10 seconds after you press the last button.

Note

1Load the document face up into the document tray.

See Loading documents, p. 3-2.

You can set the scanning resolution and contrast (see p. 5-1).

2Dial the receiving party’s fax numbers as you need.

You can also press [Redial/Pause] to redial the last number dialled with the numeric buttons.

3Press [Start/Copy].

•The fax reads the document into memory and begins sending.

•To cancel a transmission, press [Stop] during dialling or transmission. All transmissions in the sequence are

cancelled. TEL= 34567890

5

SENDING DOCUMENTS

5-13