Canon B140, B120, B115 Package, then remove the orange, Cartridge b Protective cap a and tape b

			Periodic cleaning
3	Raise the cartridge lock lever a on the	4	Remove the new BJ cartridge from its
	cartridge holder and remove the BJ		package, then remove the orange
	cartridge b.		protective cap a and tape b.

1

2

•Discard the old BJ cartridge immediately according to the local laws and regulations for disposal of consumables. You may want to place it in a plastic bag to keep any residual ink from spilling.

•Spilled ink can stain any surface; protect yourself and your work area.

1

2

•Discard the cap and tape. Never attempt to reattach them to the BJ cartridge print head.

•Install the BJ cartridge immediately after removing the cap and tape.

•Spilled ink can stain any surface; protect yourself and your work area.

5With the label facing outwards, insert the BJ cartridge into the cartridge holder a. Lower the cartridge lock lever b until you hear a click to lock the cartridge in place.

2

1

The white post (BJ cartridge guide) should be visible through the slot.

The BJ cartridge tilts slightly to the left in the loaded position.

6Close the printer cover.

If the AUTO TEST PRINT setting is set to ON:

The fax automatically prints a test page. The fax prints a test page every time you insert a BJ cartridge.

•Load the paper in the multi-purpose tray before you replace the BJ cartridge.

•You can turn off automatic test printing by changing the AUTO TEST PRINT setting. See SYSTEM SETTINGS, p. 8-5.

9

SOLUTIONS TO COMMON PROBLEMS

9-7