■Scanning documents wider than the feeder inlet (Folio Scan)

When you want to scan a document that is wider than the feeder inlet, you can scan the document if you fold the document into two, load it into the feed tray, and set the scanning side setting to [Folio].

Front Back

Separation

Off Key

Reconstructed Image

IMPORTANT

•Folio scanning requires that you feed each page manually (The Separation Off key is lit).

•Fold each page with a sharp, straight crease. Otherwise, the paper may jam or the image may be misaligned.

Chapter 10 Practical Examples

•Seam artifacts may appear in the reconstructed image because of the crease line or differences in the loading position of each side.

•Load the document with the crease line on the right side.

•The scan image of the front side becomes the left half of the reconstructed image.

•The maximum document size for Folio Scan is 22" × 34"/A1.

•22" × 34"/A1 document pages should be folded lengthwise and scanned with the following settings:

Scanner: Long Document Mode [ON1]

Page Size: Auto-Detection

•If scanning is performed when Long Document Mode is enabled, the image may be lost. Set Long Document Mode to [OFF] except when scanning 22" × 34"/A1 document pages.

•If scanning is performed with the scanning mode set to color, image quality set to [Image quality priority], and scanning side set to [Duplex], the image may be lost. If this occurs, scan by using black and white, reducing the image quality, or setting the scanning side to [Simplex].

■Registering of unregistered non-standard page sizes

You can register a non-standard page size that has not been registered as a page size by naming and registering it as a custom page size in the [Custom Page Size] setting, which is opened from the [Save] button on the [Basic] tab sheet.

10-3