Chapter 3 Basic Operation
5. Using Patchcode Sheets (Option)
When the optional patchcode decoder is installed, the
About Patchcode Sheets
Patchcode patterns are printed on the patchcode sheets used to automatically separate files. Patchcode pattern icons are registered in the following location when the ISIS/TWAIN driver is installed.
Hint
In Windows 8, the batch code sheets are saved to the applications table.
IMPORTANT
•Patchcode sheets can be used only when the application you are using supports separating files by patchcode patterns.
•Patchcode sheets are available in PDF format. There are four types; [PATCH II (A4)], [PATCH II (LTR)], [PATCH T (A4)], [PATCH T (LTR)], organized according to the paper size and pattern.
■Printing Patchcode Sheets
Open the desired patchcode sheet file with CapturePerfect 3.1 or an application that supports the PDF file format, and print the page image only at its original size.
IMPORTANT
•Print (at original size) PATCH T (A4) and PATCH II (A4) sheets on
•Patchcode sheets must be printed in their original size. The scanner may not recognize them as patchcode sheets if they are enlarged or reduced.
■Creating a Patchcode Sheet
To copy a patchcode pattern to create a different size patchcode sheet, make sure to pay attention to the following precautions:
IMPORTANT
•Adjust the patchcode so that it fits into the effective area for detecting patchcode patterns.
5 mm (0.2") | Patchcode Patterns | 5 mm (0.2") | ||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
| mm100 (3.9") |
|
|
|
|
|
|
|
|
|
| mm5 (0.2") |
| |||
|
|
|
|
|
|
|
|
|
|
| ||||
|
|
|
|
|
| patchcode patterns.) |
|
|
|
| ||||
|
|
|
|
|
|
|
|
|
| |||||
|
|
|
|
|
|
|
|
|
| |||||
|
|
|
|
|
| (Effective area for detecting |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
•When copying a patchcode pattern, the copy should be the same size as the pattern on the original.
•Be careful to keep patchcode sheets clean. If a patchcode sheet has been folded or becomes creased, reprint or replace the sheet.