Chapter 3 Basic Operation
IMPORTANT
If the patchcode decoder is not installed, the [Patchcode] batch separation setting is not displayed.
4.Perform [Scan Batch to File].
5.Set the [Type of batch separation] setting to [Scan, Continue Scanning] or [Skip, Continue Scanning].
Hint
•If [Scan, Continue Scanning] is selected or if the patchcode is PATCH ll type, the patchcode sheet image is also saved and scanning continues.
•If [Skip, Continue Scanning] is selected and the PATCH T pattern is detected, the patchcode sheet image is not saved and scanning continues.