3.Confirm your settings.
[ON2]: When the [Match original size] or [Scanner’s Maximum] page size setting is selected, scanning document page lengths up to 3,000 mm (118.1") is enabled.
[ON1]: When the [Match original size] or [Scanner’s Maximum] page size setting is selected, scanning document page lengths up to 1,000 mm (39.4") is enabled.
[OFF]: When the [Match original size] page size setting is selected, scanning document page lengths up to 432 mm (17.0") is enabled.
4.Press [Enter].
Enter Key
Chapter 3 Basic Operation
•When Long Document Mode is set to [ON1] (1,000 mm), a scanned image may be lost if the scanning mode is set to color and the image quality is set to [Image quality priority]. In the event, scan the document in black and white or reduce the image quality.
•When Long Document Mode is set to [ON2] (3,000 mm), a scanned image may be lost if the scan is performed at 400/ 600 dpi or with the scanning mode set to color and the scanning side set to [Duplex]. In the event, scan the document at a lower resolution, in black and white, or with the scanning side set to [Simplex].
•When scanning using Long Document Mode,
•If a sheet is loaded at a skewed angle when scanning long documents, it may be damaged by contacting both sides of the transport path. So be careful to avoid loading documents at skewed angles.
•Paper jam detection may react slowly when scanning long documents, which could result in jammed documents being damaged. Be especially careful to avoid paper jams.
•To feed each document page manually when scanning long documents, press the [Separation Off] key on the control panel.
The current setting is indicated by blinking square brackets [ ].
5. Press the [ ] or [ ] key and press [Enter] to accept the selection.
6.Press the Stop key to exit the User Mode.
IMPORTANT
•Processing may be slowed when scanning in the Long Document Mode.
Separation Off Key