Gently open the extension wire.
Hint
Use the extension wire if the document beyond the edge of the document tray extension.
Adjusting the Document GuidesThe document guides normally extend at equal distances to the left and right ends from the center of the feeder so that documents are by default to be placed at the center of the feeder inlet.
However, each document guide has its own lock lever, so you can place documents either toward the left or right side of the feeder inlet by locking the document guides at the appropriate positions.
Chapter 3 Basic Operation
■Loading Documents at the Left SideThis example shows the procedure for loading documents at the left side of the feeder.
1.Spread the document guides all the way to the left and right.
2.Load your documents against the left feed guide.
3.Lock the left document guide (1) by pulling out the lock lever, then slide the right document guide to the right edge of your documents (2).
(1)
(2)