Quick Start Guide

For detailed instructions, see the reference page indicated in parentheses.

Recharge the battery.

1 Connect the power cord to the battery charger, then attach the battery. When the charge lamp stops blinking and stays lit, the battery is completely charged. A full battery charge takes approximately 90 minutes. (→p.22)

Load the battery.

2Open the battery compartment cover and slide the battery pack into position until it locks into place. Press the cover closed until it clicks shut. (→p.24)

Open the CF card slot

5cover.Slide the cover in the direction shown by the arrow, then open it. (→p.28)

Insert a CF card

6(optional).

After inserting the CF card, close the cover. (→p.28)

Focus on the subject.

9Look through the viewfinder and place the AF point over the subject. Then press the shutter button down halfway to focus. (→p.30)

Shoot.

10Pressshoot. the(→p.30)shutter button fully to

12

Page 12
Image 12
Canon EOS 10D instruction manual Quick Start Guide