Specifications, Type | Canon EOS 10D specs

Specifications

• Type

Type:	Digital, single-lens reflex, AF/AE camera with built-in flash
Recording medium:	Type I and II CF card
Image size:	22.7 mm x 15.1 mm
Compatible lenses:	Canon EF lenses
	(35mm-equivalent focal length is equal to approx.1.6 times the
	marked focal length.)
Lens mount:	Canon EF mount

•Image Sensor

Type:	High-sensitivity, high-resolution, single-plate CMOS sensor
Pixels:	Effective pixels: Approx. 6.30 megapixels (3088x2056)
Total pixels:	Approx. 6.50 megapixels (3152x2068)
Aspect ratio:	3:2
Color filter system:	RGB primary color filter
Low-pass filter:	Located in front of the image sensor, non-removable

•Recording System

Recording format:	JPEG (except when Adobe RGB is set) supporting Design
	rule for Camera File system and RAW
Image format:	JPEG and RAW (12-bit)
File size:	(1) Large/Fine: Approx. 2.4 MB (3072x2048 pixels)
	(2)	Large/Normal: Approx. 1.2 MB (3072x2048 pixels)
	(3)	Medium/Fine: Approx. 1.3 MB (2048x1360 pixels)
	(4)	Medium/Normal: Approx. 0.7 MB (2048x1360 pixels)
	(5)	Small/Fine: Approx. 0.8 MB (1536x1024 pixels)
	(6)	Small/Normal: Approx. 0.4 MB (1536x1024 pixels)
	(7)	RAW (3072x2048 pixels)

	• RAW + Small/Normal: Approx. 6.0 MB
	• RAW + Small/Fine: Approx. 6.4 MB
	• RAW + Medium/Normal: Approx. 6.2 MB
	• RAW + Medium/Fine: Approx. 6.8 MB
	• RAW + Large/Normal: Approx. 6.7 MB
	• RAW + Large/Fine: Approx. 8.0 MB
	* Exact file sizes depend on the subject and ISO speed.
File numbering:	Consecutive numbering, auto reset
Color space:	sRGB, Adobe RGB
Processing parameters:	Standard parameters plus up to three sets of custom process-
	ing parameters (4 items with 5 settings each) can be set.
Interface:	USB (with dedicated cable)

•White Balance

Settings:	Auto, daylight, shade, cloudy, tungsten light, fluorescent light,
	flash, manual, color temperature setting
Auto white balance:	Auto white balance with the image sensor

Color temperature compensation: White balance bracketing: +/–3 stops in whole-stop increments

•Viewfinder

Type:	Eye-level pentaprism
Coverage:	95% vertically and horizontally with respect to the effective pixels

178

Image 178

Canon EOS 10D instruction manual Specifications, Type

Contents

English Edition Thank you for purchasing a Canon product ¢ Eyecup Eb ¢ EOS Digital Solution Disk ¢ Adobe Photoshop Elements DiskEquipment Check List ¢ EOS 10D Software Instructions Contents 107 Digital Camera Model DS6031 Safety Precautions Page If Condensation Forms Inside the Camera Avoid Condensation Related ProblemsAvoid Strong Magnetic Fields Extended Storage Handling Precautions Camera Lithium Battery for the Date and Time Quick Start Guide Set the Mode Dial to Turn the switch toSet the focus mode 4switchAF. on the lens to Mount the lens Nomenclature Cover CF card slot cover LCD Panel Viewfinder Information Mode Dial DC coupler side Power cord sideAC Adaptor DC coupler DR-400 Conventions Used in this Manual Before You1Start Attach the battery Recharging the BatteryConnect the power cord Remove the coverPage Open the battery compartment cover Installing the BatteryBattery Level Icons Insert the battery into the camera Battery Life Removing the BatteryRemove the battery pack Insert the DC coupler into the camera Using a Household Power SupplyPlace the cord in the groove Connect the DC Coupler Mounting a Lens Mounting and Detaching a LensDetaching the Lens Open the cover Installing a CF CardInsert the CF card Removing the CF Card Remove the CF card Shutter Button Main SwitchBasic Operation Halfway pressing Using the Electronic Dials Operating the Dial Menu Operations Menu item Setting Color-coded menu itemsMenu Screen Setting Procedure Menu Selections and Default Settings Menu item Settings and Description Select Clear all camera settings Reverting to the Default SettingsOn the menu, select Clear settings Clear the settings Holding the Camera Dioptric AdjustmentTurn the dioptric adjustment knob Horizontal shooting Set the Mode Dial to or Shooting Fully Automatic Shooting Turn the Mode dial toFocus the subject AF-Assist Beam with the Built-in Flash Landscape PortraitClose-up Night Portrait SportsFlash off Image Review Set the Review settingReviewing Images On the menu, select Review Changing the Review Time Set the Review time settingOn the menu, select Review time Page Settings3for Shooting On the menu, select Quality Image-Recording QualitySelect the image-recording quality Processing Approx Select C.Fn-08 RAW+JPEG rec On the menu, select Custom FunctionsSelect the image-recording quality for the Jpeg image ISO Speed in the Creative Zone Modes Setting the ISO SpeedISO Speed in the Basic Zone Modes Press the button Selecting the White Balance Press the button Select the white balance settingWhite Balance White Balance Settings Icon Application On the menu, select Custom WB Custom White BalanceShoot a white object Select an image On the menu, select Color temp Setting the Color TemperatureSet the color temperature Press Button White Balance Auto Bracketing Set the bracketing amount Canceling White Balance Auto Bracketing On the menu, select Parameters Select Set upSettings Select the Set No Return to the Parameters menu Select the parameterSet the parameter Select the Set No. that was set Selecting sRGB Select any setting except Adobe RGBSelecting a Color Space Selecting Adobe RGB On the menu, select File numbering File Numbering MethodsSelect the file numbering method Page On the menu, select Auto rotate Setting Auto RotationSet the Auto rotate setting Take a vertical shot INFO. Checking Camera Settings Display the camera settings 4Focusing Select the AF mode Focusing an Off-Center Subject One-Shot AF for Still Subjects AI Focus AF for Automatic AF Mode Switching AI Servo AF for Moving Subjects Selecting a horizontal AF point Basic Procedure for AF Point SelectionSelecting an AF Point Selecting a vertical AF point Display all the AF points in red Automatic SelectionManual Selection Display the desired AF point in red Select C.Fn-07 AF point registration Registering an AF PointRegister the AF point Switching to the Registered AF Point Press the button and button simultaneously When Autofocus Fails Manual Focusing Manual FocusingPage Selecting the Metering Mode and Drive Mode Selecting the Metering Mode Press the button Select a metering mode Metering Modes Evaluative Metering Drive Mode Selection Press the button Select the drive mode Self-timer Operation Select the self-timer Remove the eyecup Using the Eyepiece CoverAttach the eyepiece cover Advanced Operations Program AE Halfway Differences Between and Full Auto Exposure WarningsShifting the Program Shutter-Priority AE Shutter Speed Display Aperture-Priority AE Depth-of-field Preview Aperture Value Display Manual Exposure Determine the exposure Set the Mode Dial to Focus the subject Automatic Depth-of-Field AE Setting Exposure Compensation Set the exposure compensation amount On the menu, select AEB Auto Exposure BracketingSet the AEB amount For Canceling AEB+/- 1/3 stop AEB +/- 2/3 stop AEB AE Lock Compose the shot and shoot Bulb Exposures Set the shutter speed to Press the shutter button fully Mirror LockupLCD Panel Illumination Press the shutter button fully again Shooting with a Flash Turn the Mode Dial to Focus the subject Using the Built-in FlashUsing the Built-in Flash in the Basic Zone Check that the icon is lit Mode Shutter speed setting Using the Built-in Flash in the Creative ZoneFlash Sync Speed and Aperture Settings Built-in Flash RangePage On the menu, select Red-eye on/off Using Red-eye ReductionSet the red-eye reduction FE Lock Flash Exposure Compensation Flash Shot with Speedlite 550EX High-Speed Sync FP Flash Make sure the Speedlite 550EX’s pilot Taking Flash Shots in Each Shooting ModeFull Auto Flash Lamp is on High-Speed Sync FP Flash FEB Flash Exposure Bracketing Wireless Multi-Flash/E-TTL Autoflash Shooting Modeling Flash Using Non-Canon Flash Units TTL and A-TTL Autoflash Speedlites Image8Playback Single image Image PlaybackView another image Histogram Image with Shooting InformationHighlight Alert Index Display Set the camera to the playback modeFrom the index display, switch to any other display mode Display the index Magnify the image Magnified ViewDisplay the image to be magnified Scroll around Set jump display Image JumpSet the camera for playback Jump forward or back On the menu, select Auto Play Automated Playback of Images Auto playbackStart the auto play On the menu, select Rotate Rotating an ImageRotate the image Set Switch to Press Button Connecting to a TVTurn the TV on, and set the input switch Open the cover Connect the cable On the menu, select Protect Image ProtectionSet the image protection Select the image to be erased Erasing an ImageErasing a Single Image Display the erase menu Select All Erasing All ImagesErase the images On the menu, select Format Formatting the CF CardFormat the CF card 120 Direct9Printing from the Camera Direct Printing Connecting to a Card Photo PrinterConnect the Camera to the Printer Connect the camera to the card photo Printer Set up the printerTurn the camera’s switch to Then press the button Turn on the printer Connecting to a Canon BJ Printer Set the printing options PrintingSelect the image to be printed Print the image Stopping the Printing While Stop is displayed on the LCD monitor, press Printing Options Setting the QuantitySetting the Printing Style Set the number of copies Exit the style setting screen Select the style settingSet the style setting On the direct printing screen, select Style Trim the image TrimmingOn the printing style screen, select Trimming Changing the trimming frame size Moving the trimming frame Exit the trimming screenRotating the trimming frame Dpof Print Order Service for easy orderingWith Dpof On the menu, select Print Order Selecting the Images to be PrintedSelect Order Set the printing quantity Select Mark all Select the set up option Printing Options Set the set up option Exit the set up screen Select Print Direct Printing with DpofConnect the camera to the printer Set the printing style 138 139 Menu Settings ISO expansion Color tempParameters Protect Auto Play Auto power OffPrint Order Review Date/Time Auto rotateLCD Brightness File numbering Video system Clear settingsSensor clean Format On the menu, select Custom Functions C.Fn Setting Custom FunctionsChange the setting Select the Custom Function No Custom Function Settings Emits/Fires AF/AF lock, no AE lockAE/AF, no AE lock Does not emit/Fires Bottom Extreme left Right Left Extreme right Top +/Enable +/DisableCenter AF point RAW+Small RAW+Medium RAW+Large Disable +/EnablePrevioustop if powered off menu Enable Select HP while pressing NormalSelect Home Position Av+/- AF point by QCD AE lock while metering Disable EnableAF stop AF start AF pointM→Auto/Auto→ctr Clearing All Custom Functions Clear all the Custom Function settingsSelect Clear all Custom Functions 12Maintenance Set the date and time Setting the Date and TimeOn the menu, select Date/Time Set the date display format Remove the old battery Replacing the Date/Time BatterySet the switch to Remove the date/time battery cover Install a new battery Clean the image sensor Select OK Terminate the cleaning 158 13Reference 159 ISO speed Basic TerminologyCF CompactFlash card SRGB File numbers and folders ApertureFirmware Exposure Depth of fieldDepth of field is affected as described below Function Availability Table AF Modes and Drive Modes Exposure Warning List To the lens AE Lock Effects Program Line Stop increments Shutter speed Aperture value On-screen Messages Size Paper jam Paper jammed during printing Paper lever error Battery level is tooMedia type error Message Description Printer error Message Description Waste tank full Error Codes Error code Countermeasures Troubleshooting Guide Power Source Shooting Major Accessories optional Macro Flash Remote Switch RS-80N3Timer Remote Controller TC-80N3 CF Card System Map EP-EX15 177 Specifications Type Autofocus External Speedlite Customize Function Index 152 183 CT1-1241-000 Canon INC 0000Ni0.0