Canon EOS 10D Message Description, Cannot trim, Battery level is too, Low, Paper jam

On-screen Messages

Message Description

Cannot print! The image was captured by another camera or in an incompatible format. Or the image has been edited with a personal computer.

Could not print ** The image was captured by another camera or it has been edited with

imagesa personal computer and printing was attempted in accordance with the DPOF setting for ** prints.

**images remaining Since the printing with the DPOF setting was interrupted, ** prints still remain to be printed.

Cannot trim	The image was captured by another camera or it is in an incompatible
	format. Or the image has been edited with a personal computer. Such
	images cannot be trimmed.
Battery level is too	Direct printing was not possible, because the camera battery level is
low.	too low.

When a BJ printer capable of direct printing is connected to the camera, the camera’s LCD monitor may display any of the messages below. If any of these messages are displayed, check the error code on the BJ printer’s operation panel and refer to the BJ printer’s manual for the error description.

Message	Description
No paper	The paper has not been inserted properly or there is no paper. Or
	there is a problem with the paper feed operation.
No ink	There is no ink tank or the ink tank has no ink.
Paper jam	The paper jammed during printing.
Printer in use	Printing from the personal computer or the memory card in the printer
	is in progress. When the printing ends, the images in the camera’s CF
	card will start printing automatically.
Printer warming up	The printer is preparing for printing. When the printer is ready, printing
	will start automatically.
No printhead	There is no print head.
Printer cover open	Close the printer’s front cover.
Media type error	Paper that the printer cannot use has been selected. Select a paper
	that can be used with the [Style] setting on the camera’s direct
	printing screen.
Paper lever error	Set the paper spacing lever to the proper position.
Low ink level	The ink tank must be replaced soon. Keep a new ink tank on hand. To	13
	resume printing, select [Resume] on the error message screen.
		Reference

169