Canon EOS 10D instruction manual On-screen Messages

On-screen Messages

The messages displayed on the LCD monitor are as follows.

Message	Description
Busy	The camera is either processing the data or writing the captured
	image onto the CF card. Wait until it is finished.
Loading image...	The camera is reading the image in the CF card. Wait until it is
	finished.
No CF card	There is no CF card. Load a proper CF card into the camera.
CF card error	There is a problem with the CF card. Replace the CF card.
CF card full	Since the CF card is full, no more images can be recorded or no more
	printing instructions can be saved.
No Image	The CF card has no displayable images. Either take a shot and save it
	or replace the CF card with one that has images.
Image too large	The image is not displayable because it is larger than 4064 x 2704
	pixels.
Incompatible JPEG	The JPEG image is not displayable because it is incompatible.
format
Corrupted data	The image data cannot be displayed because it is damaged.
Cannot rotate	The image cannot be rotated because it was captured by another
	camera, captured in a different format, or edited with a personal
	computer.
Unidentified Image	The image is not displayable because it was captured in an unknown
	format (recording format of another camera manufacturer, etc.).
Protected!	The image cannot be erased because it is erase-protected. To delete
	the image, first disable the erase protection.
Unselectable image	Printing of a non-JPEG image was attempted. Printing is not possible.
	Specification of an image captured by another camera or an image
	edited with a personal computer was attempted with Custom WB
	image selection. The white balance data cannot be loaded.
Too many marks	The printing specification was too many. The printing cannot be
	specified above this number.
Cannot complete!	The printing specification could not be saved.
Cannot magnify!	The image could not be magnified because it was captured by another
	camera or it is in an incompatible format or it has been edited with a
	personal computer.
Change the battery	There is not enough battery power for shooting or image playback.
pack	Replace the battery.
CCDRAW	The image is not displayable because it is a CCDRAW image captured
	by another camera.

13

Reference

167