Printing Options

Trimming frame

Moving the trimming frame

Turn the < > dial to move the trimming frame horizontally or vertically.

To move the trimming frame vertically, press the

< > button to change the moving direction, then turn the < > dial. Each time you press the < > button, the direction changes.

The moving direction is indicated by the < > or

< > arrows displayed outside the trimming frame.

Rotating the trimming frame

Press the < > button to rotate the trimming frame. The button toggles between the vertical and horizontal trimming orientation.

Exit the trimming screen.

3 Press < >.

sThe trimming screen will quit and the direct printing screen will appear.

On the upper left, you can check the printing area of the image.

When a BJ printer is connected to the camera, the color of the trimming frame will not change regardless of the trimming frame size (magnification).

If you have set [Trimming] and then change the [Style] ([Image], [Borders]), the

[Readjust trimming] message will appear on the LCD monitor. Set [Trimming] again or reset the [Style] settings.

The [Trimming] setting will be canceled if you do any of the following:

Press the <> button to quit the [Trimming] setting.

Set [Trimming] for another image.

Exit from direct printing.

(Turn the < > switch to < > or press the shutter button halfway.)

• Change the trimming frame to a size bigger than the maximum size.

When setting [Trimming], use the camera’s LCD monitor. If you use a TV monitor connected to the camera with a video cable, the trimming frame may not display correctly.

The shape of the trimming frame is determined by the [Image] and [Borders] settings.

130

Page 130
Image 130
Canon EOS 10D instruction manual Exit the trimming screen, Moving the trimming frame, Rotating the trimming frame