Setting Processing Parameters

Select the parameter.

4

Turn the < > dial to select the parameter, then

press < >.

 

 

The parameter selection will change in the following

 

loop:

 

 

[Contrast]

[Sharpness]

[Color tone] [Saturation]

Set the parameter.

5 Turn the < > dial to set the parameter, then press

< >.

Each parameter can be set to one of five settings.

Return to the [Parameters] menu.

6 Press the <> button twice to return to step 1. Then press < >.

Select the Set No. that was set.

7 Turn the < > dial to select [Set 1], [Set 2], or [Set 3], then press < >.

sAfter the setting is completed, the menu will

reappear.

To exit the menu and turn off the LCD monitor,

press the <> button.

With the parameters already set, when you set the < > switch to < >, the camera will start up and display “ ” on the LCD panel until it is ready for shooting. Then the

parameter settings will be displayed. If [Set 1], [Set 2], or [Set 3] has been set, “ ”,

”, or “ ” will be displayed. And if [Adobe RGB] (p.58) has been set, “ ” will be displayed.

With C.Fn-01-2, you can set [Parameters] by pressing < > and turning the < > dial while looking at the LCD panel. (p.146)

3

Settings for

Shooting

57

Page 57
Image 57
Canon EOS 10D Select the parameter, Set the parameter, Return to the Parameters menu, Select the Set No. that was set