Canon EOS 10D instruction manual Custom Function Settings

Custom Function Settings

C.Fn-01	SET button func. when shooting
	You can assign a different function to the <	> button.
	In the case of C.Fn-01-1/2, you can press <	>, then turn the
	< > dial to set the desired setting directly while looking at the
	LCD panel.

0:Default (no function)

1:Change quality

You can select the recording quality directly.

2:Change parameters

You can select the processing parameters directly.

“ ” is for [Normal]. “ ”, “ ”, and “ ” are for [Set

1], [Set 2], and [Set 3] respectively. When “” is selected, the color space will be [Adobe RGB].

3:Menu display

Provides the same function as the <> button.

4:Image replay

Provides the same function as the < > button.

C.Fn-02 Shutter release w/o CF card

0:Possible without CF card

1:Not possible

The shutter release will not work if there is no CF card in the camera, so it prevents you from forgetting to load a CF card. If

there is no CF card and you press the shutter button, “ ” will blink on the LCD panel and in the viewfinder.

C.Fn-03 Flash sync speed in Av mode

0:Auto

1:1/200sec. (fixed)

For flash shot in the aperture-priority AE mode (Av), the shutter speed will be locked at 1/200 sec. This prevents a slow shutter speed from being set in very dark conditions.

C.Fn-04 Shutter button/AE lock button

0:AF/AE lock

1:AE lock/AF

Convenient when you want AF and AE lock to operate separately. Pressing the < > button focuses the subject, while pressing the shutter button halfway sets the AE lock.

146