Connect the Camera to the Printer

Connecting to a Canon BJ Printer

To connect the camera and printer with the necessary cable, refer to the manuals that came

with the printer.

To BJ printer

Follow steps 1 to 3 in “Connecting to a

1 Card Photo Printer” to connect the camera to the BJ printer. (p.123)

Turn the camera’s <> switch to < >,

2 then press the < > button.

BJ printer-connected icon

sAn image in the CF card will be displayed.

Turn on the printer.

3 Press the printer’s power button to turn it on.

sThe < > icon will appear on the camera’s LCD monitor.

sThe <> icon will appear on the printer’s operation panel.

When disconnecting the cable from the camera’s < > terminal, be sure to grasp the plug instead of the cord to pull it out.

Do not use any cable other than the dedicated interface cable to connect the camera and printer.

To disconnect the cable from the camera and printer, follow the procedure below:

1.Turn off the camera.

2.Disconnect the cable from the printer.

3.Disconnect the cable from the camera.

When you disconnect the camera from the printer, the < > icon or < > icon will disappear from the camera’s LCD monitor and the camera will return to normal playback.

Even while the camera is connected to the printer, you can instantly switch to shooting by pressing the shutter button halfway (except during actual printing).

124

Page 124
Image 124
Canon EOS 10D instruction manual Connecting to a Canon BJ Printer