Canon EOS 10D instruction manual Using a Household Power Supply, Place the cord in the groove

Using a Household Power Supply

With AC Adapter Kit ACK-E2 (optional), you can connect the camera to a household power outlet. Then you do not have to worry about exhausting the battery while using the camera.

1

2

3

4

Place the cord in the groove.

•Carefully insert the cord into the groove without damaging it.

Insert the DC coupler into the camera.

•Open the cover and lower the covering on the cord hole.

•Insert the DC coupler and fit the cord into the cord hole.

•Check that the cord is placed tightly in the cord hole, and slide the DC coupler into the compart- ment until it locks into place.

•Push down the cover until it clicks.

Connect the DC Coupler.

•Connect the DC Coupler’s plug to the AC adapter’s socket.

Connect the power cord.

•Connect the power cord to the AC adapter.

•Plug the cord into a power outlet.

•When you are finished, remove the plug from the power outlet.

•Do not connect or disconnect the power cord while the camera's < > switch is set to < > .

•Do not use the DC coupler with any camera other than the EOS 10D, D60, and D30.

26