Canon LU A 90, LU_A 80, LU A 8S Recording Motion Jpeg Movies on a Memory Card, 100, Mb Sd

Recording Motion JPEG Movies on a

Memory Card

You can record Motion JPEG movies with the camcorder, from a tape in the camcorder or from devices connected via the DV terminal or the AV terminal. The sound of a movie

recorded on a memory card will be monaural.

1.

Press

the

start/stop

button

to

begin

recording.

[

With

SD Memory

Cards

up to

512

MB, you

can record until

I

"CARD FULL" appears (approx. 33 minutes in 320 x 240 with a I

512

MB SD

Memory Card). With MultiMediaCards,

the recording I

time is limited to 10 sec. in 320 x 240 pixels and 30 sec. in 160 x

120

pixels.

l

2.

Press

the

start/stop

button

to

stop

recording.

(D Do not turn offthe camcorder, change the position of the TAPE/CARD switch,

disconnect the power source, open the memory card cover or remove the

memory card while the card access indicator is flashing. Doing so could result

in data damage.

O When you are using a SD Memory Card, make sure that the protect switch is

set to

allow

recording.

O Do not Ioadlunload a cassette during recording.

(D We recommend using a Canon SD Memory Card, or a SD Memory Card with a

transfer rate of more than 2 MB/sec., right after you have formatted it with this

camcorder.

With memory

cards not

formatted

with

this

camcorder, or when

recordinglerasing

has been repeatedly

performed,

the

writing speed may be

lower and recording may stop.

O You can select the focusing point when recording a movie on the memory card.

O Users of Windows XP: When you plan to connect the camcorder to a computer

using a USB cable, keep the length of one movie shorter than approx. 12 min.

in 320

x 240

and

35 min.

in 160 x 120.

O The recording time varies according to the movie size, the recoding condition

and the subjects.

100