Canon LU A 8S, LU_A 80, LU A 90 Press the Audio DUB. button on the wireJess controller

5.Press the AUDIO DUB. button on the wireJess controller.

"AUDIO DUB." and "_ " appear.

6.Press the PAUSE m button on the wireless controller to begin dubbing.

•Audio device: Begin playback.

•Microphone: Speak into the microphone.

7.Press the STOP [] button on the wireless controller to stop dubbing.

Audio device: Stop playback.

O Use only tapes recorded in SP mode 12-bit audio sound with this camcorder. Audio dubbing will stop if the tape has a blank section or a section recorded in LP mode or 16-bit mode.

O _When using the built-in microphone, do not connect any devices to the MIC terminal.

O You cannot use the DV terminal for audio dubbing.

O If you add sound to a tape not recorded with this camcorder, sound quality may decrease.

O Sound quality may decrease when you add sound to the same scene for more than 3 times.

O You can check the picture on the LCD screen.

O When you connect an audio device, check the sound via built-in speaker or audio device.

O When you use a microphone, you can check the picture on a TV connected via the AV terminal and the sound via headphones connected to the TV.

O Set the zero set memory at the end of the scene you wish to dub audio. The camcorder will automatically stop audio dubbing at that point.

86