Canon LU A 8S, LU_A 80, LU A 90 instruction manual Adjusting the Volume, Menu

Adjusting the Volume

When you use the LCD screen for playback, the camcorder plays back the sound via

built-in speaker. The speaker does not sound when you close the LCD panel. Use

headphones when using the viewfinder.

SET dial

_h, (phones) terminal

Speaker

				"bOO
The headphones terminal also serves as AV terminal. Headphones can only be used
when	"Q" is displayed on		the screen. If not, change the setting following the procedure	_"
below.				_=
			I
			1
MENU		VCR SETUP	I_ AVIPHONES Q ..AV
([_ 38)			J
Open the menu and select [VCR SETUP]. Select [AV/PHONES f}], set it to
[PHONES Q] and close the menu.
	O The speaker does not sound when "Q" is displayed.
	O Do not connect headphones unless "f'_" is displayed as it produces noise.
Adjusting		,,the....	me
		i	I

Turn the SET dial up to increase the volume, and down to lower the volume.

•A volume bar appears for 2 seconds.

•You can turn offthe volume completely by turning the SET dial down until [OFF] appears. Turn the SET dial up to increase the volume again.

35