Canon LU A 8S, LU_A 80, LU A 90 instruction manual 140, Printer Error

Message Explanation

COULD NOT PRINT X You attempted to use the print order settings to print X images that were

IMAGESrecorded with another camcorder, with a different compression or were edited on a computer.

SET _] PRINT ORDER You attempted to print an image from the CARD PLAY menu

[_ _ PRINT] without having set the print order.

PRINT

ORDER

You

attempted

to set

more

than

200

still

images in

the

print order.

ERROR

CANNOT

TRIM

You

attempted

to trim

an image

that

was

recorded

with

another

camcorder.

READJUST

TRIMMING

You

changed

the

print

style

after

you set

the

trimming

settings.

PRINTER

ERROR

Cancel printing.

Turn

off the

printer

and

turn

it back

on.

Check the printer

status. If the error persists, consult your dealer or a Canon Service

Center listed in the Contact List provided with the printer or the printer

manual.

PRINT ERROR

HARDWARE ERROR

RECHARGE THE

PRINTER BATTERY

COMMUNICATION

ERROR

CHECK PRINT

SETTINGS

PRINTER IN USE

PRINTER WARMING UP

PAPER LEVER ERROR

PRINTER COVER OPEN

NO PRINTHEAD

Cancel printing, disconnect the USB cable and turn offthe printer. After a while, turn the printer back on and reconnect the USB cable. Check the printer status. If the error persists, consult your dealer or a Canon Service Center listed in the Contact List provided with the printer or the printer manual.

When you are printing using the _ _ button, check the print settings.

Cancel

printing.

Turn

offthe printer and

turn

it back on.

Check

the

printer

i status.

If the printer

is equipped

with

a battery,

it

might

be

exhausted.

In

such

case,

turn

off

the

printer,

replace

the battery

and

turn it

back

on.

If

the error

persists,

consult

your

dealer

or

a Canon

Service

Center

listed

in

the

Contact

List

provided

with the printer

or

the

printer

manual.

The printer battery is depleted.

The printer is experiencing a data transmission erro_: Cancel printing, disconnect the USB cable and turn off the printer. After a while, turn the printer back on and reconnect the USB cable. When you are printing

using the _ _ button, check the print settings.

Or, you attempted to print from a memory card that contains a large number of images. Reduce the number of images.

The print setting cannot be used for printing with the _ _ button.

The printer is in use. Check the printer status.

Printer is warming up. If the message does not disappear after a few seconds, check the printer status.

Paper lever error occurred. Adjust the paper selection lever to the proper position.

Close the printer cover securely.

No print head is installed in the printer or print head is defect. Refer to the instruction manual of your printe_:

140