Canon LU A 90, LU_A 80, LU A 8S instruction manual Effects

!

1. Open the menu and select [D.EFFECT SETUP].

2. Select [D.E.SELECT] and set it to [MULTI-S].

3. Select [M.S.SPEED] and select the transition speed. Following transition speeds can be selected: fast (every 4 frames), moderate (every 6 frames*), slow (every 8 frames*).

*In Low Light mode: moderate (every 8 frames), slow (every 12 frames).

4.Select [M.S.SPLIT], select the number of sequences and close the menu.

"MULTI-S" flashes.

5.	Press	the	D.EFFECTS	button.		D.EFFECTS
	, MANUAL: Images will be captured each time you press the
	D.EFFECTS button. The blue frame indicating the next
	sequence disappears after the last image. Pressing the
	D.EFFECTS button for more than 1 second cancels the
	images one after another.
	, FAST, MODERATE, SLOW: The set number of images will be captured at the set
	speed. To cancel the multi-image screen, press the D.EFFECTS button.
6.	Press	the	start/stop	button	to begin	recording.
	The multi-image screen is recorded on the tape.						_=

O Turn off the digital effect when you do not use it.

O The camcorder retains the setting even if you turn it off or change the program == AE mode.

O The image quality may be slightly lower with digital effects.

O Digital effects cannot be used in the following cases:

-When the program selector is set to EASY.

-During DV dubbing.

O Faders cannot be used when Card Mix is activated.

About the multi-image screen:

¢n

O The multi-image screen cannot be used in the following cases:

-In the night modes.

-When the widescreen mode is selected.

-When Card Mix is activated.

O In PLAY (VCR) mode: Pressing any tape operation button (such as play or pause), or performing date search cancels the multi-image screen.

67