Canon LU A 8S Adjusting the Focus Manually, Press the Focus button. iv1Fappears, Set the program

Adjusting the Focus Manually

Autofocus may not work well on the following subjects. In such case, focus manually.

	Subjects	with low		Through
Reflective	contrast	or without	Fast Moving	dirty or wet	Night Scenes
surfaces	vertical	lines	Subjects	windows

SET dial

			Zoom lever
	FOCUS	/
		button	¢)	<
			Program selector
			sg
			cQ	_=
				=rl
1. Set the program	selector	to l_.	[_

2. Adjust the zoom.

When you operate the zoom after adjusting the focus, the subject may not stay in focus. Adjust the zoom before the focus.

3.Press the FOCUS button. "iv1F"appears.

_W-T

FOCUSIDATACODE

4.Turn the SET dial to adjust the focus.

•Turn the SET dial up or down until the image appears focused.

•Press the FOCUS button to return to autofocus.

53