Canon LU_A 80 Recording Still Images on a Memory Card, Set Camcorder To Card Camera Mode, Halfway

Recording Still Images on a Memory

Card

You can record	still	images	with the camcorder,			from	a tape	in the camcorder	or from
devices connected		via the	DV	terminal	or AV terminal.		You	can also record	a still image
on the memory	card	while	you	record	a movie	on the	tape.

	PHOTO	button
_._!/	Program	selector

Card access indicator

1.	Set the	camcorder	to CARD CAMERA		mode.
	A white focusing frame appears in the center of the screen. The camcorder will focus
	on the subject in the center of the screen. To change the focusing point, see Selecting
	the Focusing Point (C_J 103).
2.	Press	the PHOTO	button	halfway.	---.,_

•@ and focusing frame turn green when focus is adjusted. The beep sounds twice. The picture may appear out of focus for a

moment whi,e the camcorder is focusing. --_'

•Exposure is locked.

•When you press the PHOTO button on the wireless controller, recording starts immediately.

T"

##

3. Press

the

PHOTO

button

fully.

and

you

hear

a shutter

,[

_m_

=o

•

@

and focusing

frame

disappear

I

/_

sound.

I

•

The

card

access

indicator

flashes

and the

card

access

display

I

_'_"__,"_J

appears.

L

•

The

still

image

shown

on

the screen

will be recorded

on the memory card.

O Do not turn offthe camcorder, change the position of the TAPE/CARD switch, disconnect the power source, open the memory card cover or remove the memory card while the card access indicator is flashing. Doing so could result in data damage.

O When you are using a SD Memory Card, make sure that the protect switch is set to allow recording.

93